Lilliput Low Rise Platform Lift Minilift for small height differences (max. 1800 mm) with cage.
Thanks to Lilliput today it's possible to overcome small gradients and to easily connect two floors using an implant which is very similar to a small elevator. The user accesses the lower floor with a door, while he accesses the upper floor with a small gate.
Its aesthetical impact and encumbrance of the implant are minimum because the machine uses a very limited volume, that is the volume of the very small gate. In fact if the implant is on the upper floor, after a few minutes of idle activity it will automatically come down to the lower floor, completely re-entering the castle's volume.
Lilliput is bundled with a carpentry space (available in over 150 colour tonalities), that makes it easy to install it where it's not possible to find a wall space. The device is compliant to the current laws, provided with CE label.
Photo library Lilliput low rise platform lift
Click on a photo to increase the image

Technical details Lilliput low rise platform lift
|
Manufactured in:
Italy
Lifting platform:
The machine is built with a loading plan that moves along two guides (T 70 channel; polyurethane sliding guides) mounted on one of the space's sides in laboratory. The user accesses the upper level with a small gate. The user accesses the lower floor with a door. Lifting is achieved by an hydraulic cylinder.
Lifting capacity:
300 Kg.
On-board controls:
"Human presence" type (they work only if the user keeps them pressed). Braille and audible controls let the user to choose the floor; emergency stop button.
Controls on the floors:
"Human presence" type (they work only if the user keeps them pressed). Call button with busy/present light indicator, integrated on the door's upright and on the small gate.
Electrical power supply:
Monophase 230+/-/ 10% Volt 50 Hz, with wire ground; maximum power absorption 5 A.
Power supply:
Auxiliary circuit power supply for the on-board controls via multipolar cable.
Switch-board:
Plastic material (with IP 56 protection gradient), with an emergency uninterruptible power supply and a integrated dc converter; (plastic material box for the switch-board and oleo dynamic centraline size 1000 x 1000 420 mm - only upon request).
Stroke:
Up to 1,8 m (the stroke must be measured from the floor's lower level to the floor's upper level which is being served).
Stops:
Two
Speed:
0.05 m/s.
Carpentry space:
Metallic carpentry castle, made with galvanized plate EN1042-Fe P02 GZ275 MC CO Galvamag cold-folded (painted with customizable epoxidous powder colour - only upon request); padded made either with reinforced VISARM 10/11 crystal or with blind panels.
Protection features:
Electrical safety devices:
Mechanical safety devices:
Warranty:
24 months on materials, when serviced by an authorised agent