LEV Homelift
Your own homelift

Manufactured in:
USA

General specifications:

• Rated load: 430kg
• Speed: 0,20 m/s
• Minimum overhead clearance: 2.740 mm
• Minimum pit depth: 150 mm
• Maximum travel: 15.240 mm
• Maximum number of stops: 5 (minimum 450 mm travel between stops)

Mechanical Equipment:

• 230 VAC, 60 Hz, 20 amp single phase power supply with neutral and ground (4 wires);
• Two #60 roller chains;
• Frequency controlled variable speed geared machine with counterweighted chain drive, 2 hp motor;
• Modular Dual T-rail system.

Car and Appointments:

• 914 mm x 1219 mm x 2134 mm high car size;
• Melamine wall panels in choice of champagne, light oak, dark oak or white;
• White ceiling;
• Two recessed halogen lights;
• Wooden handrail to match wall panels;
• Accordion car gate in choice of champagne, chalk, light oak, dark oak or white;
• Unfinished plywood floor (with removable insert for finished floor by others);
• Telephone.

Controls:

• Programmable Logic Controller (PLC) with digital signal processor;
• Fully automatic operation;
• Car operating panel and hall stations (brushed stainless steel or brass) with LED floor position/diagnostic display and call acknowledgment;
• Automatic car lighting with constant on switch;
• Automatic homing to a designated floor;
• Bi-directional levelling;
• Emergency stop switch;
• Emergency alarm button;
• Hoistway wiring with conduit (hall stations/inter-locks);
• Uninterruptible power supply (UPS) for lowering and automatic gate operation (if supplied) in case of a power failure.

Safety Devices:

• Lockable auxiliary disconnect for car lighting circuit;
• Lockable auxiliary disconnect for drive unit circuit;
• Upper and lower terminal limits;
• Final limits;
• Pit switch and car top stop switch;
• Battery backup emergency light and alarm;
• Car gate safety switch;
• Electromechanical interlocks (for doors by others);
• Slack chain safety device.

Options:

• 914 mm x 1.524 mm or 1016 mm x 1.372 mm car sizes;
• Special car size. For applications consult factory with specific measurement and application details (local codes may require variances on non-standard cabsizes);
• 2682 mm or 2865 mm inside car heights (requires additional overhead space);
• Unfinished wood veneer panels (oak, cherry or birch);
• Unfinished inset wood veneer panel walls (oak, cherry or birch);
• Factory applied finish to wood veneer panels and handrail;
• Raised wood panel walls (oak, cherry or birch) with choice of finish;
• Recessed telephone cabinet (brushed stainless steel or brass, or polished stainless steel or brass);
• Matching wood veneer ceiling panel - not available with melamine wall panels;
• Hall stations and car operating panel in polished stainless steel or brass;
• Metal handrail (brushed stainless steel or brass, or polished stainless steel or brass) - not available with melamine wall panels;
• Automatic car gate operator with light beam safety curtain;
• Automatic hoistway door operator;
• GAL Type 'N'interlocks (requires additional hoistway space);
• Buffer springs (requires 305 mm deep pit min.);
• Remote located elevator controller;
• Counterweight safety device.

Car Gate Upgrades:

• Accordion car gate with 3 clear vision panels;
• Accordion car gate with all clear vision panels;
• Solid aluminium or perforated aluminum accordion car gate in clear coat finish or brass finish;
• Deluxe Visifold® car gate.

Control Upgrades:

• Key switch controls in car operating panel and/or hall stations.

Warranty:
24 months on materials, when serviced by an authorised agent